dynamic-vlan-assignment
Enables dynamic VLAN assignment on
this WLAN, and adds or removes VLANs for the selected WLAN. Configure this feature to allow
an override to the WLAN configuration. If, as part of the authentication process, the
RADIUS server returns a client's VLAN-ID in a RADIUS Access-Accept packet, and this feature
is enabled, all client traffic is forward on that VLAN. If disabled, the RADIUS server
returns VLAN-ID is ignored and the WLAN‘s VLAN configuration is used. For more information,
see
vlan. This option is disabled by default.
Supported in the following platforms:
- Access Points — AP7502, AP7522,
AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
- Wireless Controller — RFS4010
- Service Platforms — NX5500, NX7500,
NX9500, NX9600, VX9000
Syntax
dynamic-vlan-assignment allowed-vlan <VLAN-ID>
Parameters
dynamic-vlan-assignment allowed-vlan <VLAN-ID>
| dynamic-vlan-assignment allowed-vlan |
Enables dynamic VLAN assignment and configures a list of VLAN IDs or
VLAN alias allowed access to the WLAN |
| <VLAN-ID> |
Specify the list of VLAN IDs or the VLAN alias names. For example,
10-20, 25, 30-35, $guest. For example, 10-20, 25, 30-35, $guest. For
information on VLAN aliases, see alias.
|
Examples
rfs4000-229D58(config-wlan-test)#dynamic-vlan-assignment allowed-vlans 10-20
rfs4000-229D58(config-wlan-test)#show context
wlan test
ssid test
bridging-mode tunnel
encryption-type none
authentication-type none
dynamic-vlan-assignment allowed-vlans 10-20
rfs4000-229D58(config-wlan-test)#
Print
this page
Email this topic
Feedback
View PDF
Download EPUB