description
   
      
      Supported in the following platforms: 
         
         
            - Access Points — AP7502, AP7522,
               AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
 
            - Wireless Controller — RFS4010
 
            - Service Platforms — NX5500, NX7500,
               NX9500, NX9600, VX9000
 
         
       
      Syntax
      
      Parameters
description <WORD>
               
               
               
                  
                     | description
                        <WORD> | 
                     Configures a description for this VLAN bridge
                           - <WORD> – Enter a description. The description should be unique to the VLAN‘s specific configuration to help differentiate it from other VLANs with similar configurations.
 
                         
 | 
                  
               
            
 
 
      Example
nx9500-6C8809(config-profile-default-rfs4000-bridge-vlan-1)#description “This is a description for the bridged VLAN”
nx9500-6C8809(config-profile-default-rfs4000-bridge-vlan-1)#show context
 bridge vlan 1
 description "This is a description for the bridged VLAN"
 bridging-mode isolated-tunnel
 ip igmp snooping
 ip igmp snooping querier
nx9500-6C8809(config-profile-default-rfs4000-bridge-vlan-1)#
 
      Related Commands
               
               
               
                  
                     | no | 
                     Removes VLAN‘s description |