Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

mu-mac

Configures a MAC address and mask based filter for this role policy

Supported in the following platforms:

  • Access Points — AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
  • Wireless Controller — RFS4010
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

mu-mac [<MAC>|any]
mu-mac any
mu-mac <MAC> {mask <MAC>}

Parameters

mu-mac any

any

 Applies role to any wireless client (no MAC address to match). This is the default setting. 
mu-mac <MAC> {mask <MAC>}

<MAC>

Applies role to the wireless client having specified MAC address

  • <MAC> – Sets the MAC address in the AA-BB-CC-DD-EE-FF format

mask <MAC>

Optional. After specifying the client‘s MAC address, specify the mask in the

  • AA-BB-CC-DD-EE-FF format. The role is applied to the wireless client exactly matching the specified MAC address and MAC mask.

Examples

nx9500-6C8809(config-role-policy-test-user-role-testing)#mu-mac 11-22-33-44-55-66
nx9500-6C8809(config-role-policy-test-user-role-testing)#show context
 user-role testing precedence 10
  authentication-type eq kerberos
  encryption-type eq wep128
  ap-location contains office
  mu-mac 11-22-33-44-55-66
  group contains testgroup
  captive-portal authentication-state pre-login
  city exact SanJose
  company exact ExampleCompany
  country exact America
  department exact TnV
  emailid exact testing@examplecompany.com
  employeeid contains TnVTest1
nx9500-6C8809(config-role-policy-test-user-role-testing)#

Related Commands

no

Removes the MAC address and mask for this user-defined role
Published June 2019prev | next

Email this topicEmail this topic

Print this pagePrint this page