Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

no (client-identity-group-config-mode)

Removes the client identity associated with the client identity group

Supported in the following platforms:

  • Access Points — AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
  • Wireless Controller — RFS4010
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

no [client-identity|load]
no client-identity <CLIENT-IDENTITY-NAME> precedence <1-10000>
no load default-fingerprints

Parameters

no client-identity <CLIENT-IDENTITY-NAME> precedence <1-10000>

no client-identity <CLIENT-IDENTITY-NAME> precedence <1-10000>

Disassociates a specified client identity from this client identity group

  • <CLIENT-IDENTITY-NAME> – Specify the client identity name.
    • precedence <1-10000> – Specify the above specified client identity‘s precedence value from <1-10000>.

The client identity rule is applied based on its precedence value. Lower the value, higher is the precedence. Therefore, a client identity with precedence 5 gets precedence over a client identity having precedence 20.

 
no load default-fingerprints
no load default-fingerprints Disables automatic loading of built-in, system-provided client identity fingerprints

Examples

<exsw5>(config-client-identity-group-test)#show context
client-identity-group test
 client-identity test precedence 1
<exsw5>(config-client-identity-group-test)#
<exsw5>(config-client-identity-group-test)#no client-identity test
<exsw5>(config)#

Related Commands

client-identity

Associates an existing and configured client identity (device fingerprinting) with this client identity group
Published June 2019prev | next

Email this topicEmail this topic

Print this pagePrint this page