802.11v
Use this command to configure 802.11v parameters on this WLAN. The IEEE 802.11 family of
standards includes the 802.11v standard. The 802.11v allows client devices to
exchange information about the network topology, including information about the RF environment, making each
client network aware, facilitating overall improvement of the wireless network.
Supported in the following platforms:
- Access Points — AP7502, AP7522,
AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
- Wireless Controller — RFS4010
- Service Platforms — NX5500, NX7500,
NX9500, NX9600, VX9000
Syntax
802.11v [bss-transition|session-information-url <URL>]
Parameters
802.11v [bss-transition|session-information-url <URL>]
|
802.11v
|
Configures IEEE 802.11v parameters, such as 'bss-transition' and
session-information-url'.
|
|
bss-transition
|
Enables BSS (Base station Subsystem) transition
management capabilities on the WLAN APs. When enabled, WLAN APs
send BSS
Transition Management Request frames to 802.11v capable
clients. These request frames suggest a specific AP, or a set of
APs to which the client can transition to for better throughput
and QoS (Quality of Service).
Note:
This feature is disabled by default.
|
|
session-information-url <URL>
|
Configures the session information URL.
This is the URL containing specific information about the client
session. This is the URL to which the WLAN AP sends the BSS
Transition Management Request frames.
|
|
Examples
NOC-NX9500(config-wlan-test)#802.11v bss-transition
NOC-NX9500(config-wlan-test)#show context
wlan test
ssid test123
bridging-mode local
encryption-type none
authentication-type none
802.11v bss-transition
NOC-NX9500(config-wlan-test)#
Related Commands
|
no (wlan-config-mode)
|
Disables 802.11v BSS Transition Management capabilities and
removes the session-information-url
|
|
Print
this page
Email this topic
Feedback
View PDF
Download EPUB