rx-sensitivity-reduction
    
        
            Allows you to set the selected radio's receive sensitivity reduction threshold level.
                This threshold determines the RSSI (in dBm) at which the radio acknowledges the SOP
                    (Start of Packet) frames received from clients and begins to
                demodulate and decode the packets.
            In highly dense environments, or single-channel networks, having two or more radios
                sharing a channel, CCI (co-channel interference) adversely impacts
                network performance. By setting this threshold, you can control the radio‘s receive
                sensitivity to interference and noise, thereby reducing the impact of CCI. You are
                basically configuring the AP to not decode packets that have a signal strength below
                the specified threshold level.
            The available rx-sensitivity-reduction threshold levels are: high, low, medium, and None. Refer to the
                following table for rx-sensitivity-reduction threshold level to RSSI mapping for the
                2.4 GHz and 5 GHz bands:
            
                    
                    
                    
                    
                    
                        
                            | 
                                 802.11 Bands 
                             | 
                            
                                 High Threshold 
                             | 
                            
                                 Medium Threshold 
                             | 
                            
                                 Low Threshold 
                             | 
                         
                    
                    
                        
                            | 
                                 2.4 GHz 
                             | 
                            
                                 -79 dBm 
                             | 
                            
                                 -82 dBm 
                             | 
                            
                                 -85 dBm 
                             | 
                         
                        
                            | 
                                 5 GHz 
                             | 
                            
                                 -76 dBm 
                             | 
                            
                                 -78 dBm 
                             | 
                            
                                 -80 dBm 
                             | 
                         
                    
                 
 | 
         
        Supported in the following platforms:
            
            
                - Access Points — AP7502, AP7522,
                    AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432,
                    AP8533
 
            
         
        Syntax
            
            rx-sensitivity-reduction [high|low|medium|none]
         
        Parameters
            
            rx-sensitivity-reduction [high|low|medium|none]
            
                    
                    
                    
                        
                            | 
                                 rx-sensitivity-reduction [auto|high|low|medium] 
                             | 
                            
                                Sets the selected radio's receive sensitivity reduction threshold
                                    level. The options are: 
                                        - 
                                            
high – Sets the threshold level as high. By setting
                                                the threshold at high, you are forcing the radio to
                                                ignore all traffic having a signal strength below
                                                the high threshold value. This results in fewer
                                                traffic interruptions due to collision and Wi-Fi
                                                interference.  
                                         
                                        - 
                                            
low – Sets the threshold level as low. 
                                         
                                        - 
                                            
medium – Sets the threshold level as medium. 
                                         
                                        - 
                                            
none – Does not set a threshold. This option is
                                                applicable for networks having minimal to no
                                                CCI. 
                                            Note: 
                                                The default setting is None. 
                                             
                                         
                                     
 
                             | 
                         
                    
                 
 | 
         
        Examples
            
            ap8432-070235(config-device-74-67-F7-07-02-35-if-radio2)#rx-sensitivity-reduction high
            ap8432-070235(config-device-74-67-F7-07-02-35-if-radio2)#show context
 interface radio2
  wlan test bss 1 primary
  rx-sensitivity-reduction high
ap8432-070235(config-device-74-67-F7-07-02-35-if-radio2)#