Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

next-server (dhcpv4-pool-static-binding)

Configures the next server utilized in the boot process

Supported in the following platforms:

  • Access Points — AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
  • Wireless Controller — RFS4010
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

next-server [<IP>|<HOST-ALIAS-NAME>]

Parameters

next-server [<IP>|<HOST-ALIAS-NAME>]

<IP>|

Configures the next server‘s (the first server in the boot process) IP address

<HOST-ALIAS-NAME>

Configures a host alias, mapped to the next server‘s IP address

  • <HOST-ALIAS-NAME> – Specify the host alias name. It should be existing and configured.

Note: A host alias maps a name to a single network host. For example, ‘alias host $HOST 1.1.1.100‘. In this example the host alias is ‘$HOST‘ and it maps to a single host ‘1.1.1.100‘. For more information, see alias.

Examples

nx9500-6C8809(config-dhcp-policy-test-pool-pool1-binding-test)#next-server 172.16.10.24
nx9500-6C8809(config-dhcp-policy-test-pool-pool1-binding-test)#show context
  static-binding client-identifier test
   ip-address 172.16.10.9
   client-name RFID
   domain-name documentation
   netbios-node-type b-node
   bootfile test.txt
   default-router 172.16.10.8 172.16.10.9
   dns-server 172.16.10.7
   netbios-name-server 172.16.10.23
   next-server 172.16.10.24
nx9500-6C8809(config-dhcp-policy-test-pool-pool1-binding-test)#

Related Commands

no (dhcpv4-pool-static-binding)

Resets values or disables DHCP pool static binding settings
Published June 2019prev | next

Email this topicEmail this topic

Print this pagePrint this page