Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

no (client-identity-config-mode)

Removes the DHCP options match criteria configurations

Supported in the following platforms:

  • Access Points — AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
  • Wireless Controller — RFS4010
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

no [dhcp <1-16>|dhcp-match-message-type]

Parameters

no [dhcp <1-16>|dhcp-match-message-type]

dhcp <1-16>

Removes the DHCP option match criteria rule identified by the <1-16> keyword

  • <1-16> – Specify the DHCP option match criteria rule index

dhcp-match-message-type

Removes the DHCP message type to match

Examples

The following example shows the client identity ‘test‘ settings before the ‘no‘ commands are executed:

rfs4000-229D58(config-client-identity-test)#show context
client-identity test
 dhcp 2 message-type discover option 2 exact hexstring 012456c22c44
 dhcp 1 message-type request option 60 exact ascii MSFT5.0
 dhcp-match-message-type all
rfs4000-229D58(config-client-identity-test)#

The following example shows the client identity ‘test‘ settings after the ‘no‘ commands are executed:

rfs4000-229D58(config-client-identity-test)#no dhcp 2
rfs4000-229D58(config-client-identity-test)#no dhcp-match-message-type
rfs4000-229D58(config-client-identity-test)#show context
client-identity test
 dhcp 1 message-type request option 60 exact ascii MSFT5.0
rfs4000-229D58(config-client-identity-test)#

Related Commands

dhcp

Configures the DHCP option match criteria for device fingerprinting
dhcp-match-message-type

Configures the DHCP message type for device fingerprinting
Published June 2019prev | next

Email this topicEmail this topic

Print this pagePrint this page