interface-config-radio-instance
Maps an existing meshpoint to this radio
Use this command to assign each WLAN its own BSSID. If using a single-radio access point, there are 8 BSSIDs available. If using a dual-radio access point there are 8 BSSIDs for the 802.11b/g/n radio and 8 BSSIDs for the 802.11a/n radio.
Print
this page
Email this topic
Feedback
View PDF
Download EPUBmeshpoint <MESHPOINT-NAME> {bss <1-16>}
meshpoint <MESHPOINT-NAME> {bss <1-16>}
| meshpoint <MESHPOINT-NAME> | Maps a meshpoint to this radio. Specify the meshpoint name. |
| bss <1-16> | Optional.
Specifies the radio‘s BSS where this meshpoint is mapped
|
nx9500-6C8809(config-profile-ap71xxTest-if-radio1)#meshpoint test bss 7 nx9500-6C8809(config-profile-ap71xxTest-if-radio1)#show context interface radio1 meshpoint test bss 7 nx9500-6C8809(config-profile-ap71xxTest-radio1)#
| no (radio-interface-config-command) | Disables meshpoint on the selected radio |