Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

ssid-match

Configures the SSID (and its character length) used as a match criteria

Supported in the following platforms:

  • Access Points — AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
  • Wireless Controller — RFS4010
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

ssid-match [ssid|ssid-len]
ssid-match [ssid <SSID>|ssid-len <0-32>]

Parameters

ssid-match [ssid <SSID>|ssid-len <0-32>]

ssid <SSID>

Specifies the SSID match string

  • <SSID> – Specify the SSID string.

Note: Specify the correct SSID to ensure proper filtering.

ssid-len <0-32>

Specifies the length of the SSID

  • <0-32> – Specify the SSID length from 0 - 32 characters.

Examples

nx9500-6C8809(config-test-signature-test)#ssid-match ssid PrinterLan
nx9500-6C8809(config-test-signature-test)#show context
 signature test
  bssid 11-22-33-44-55-66
  src-mac 00-1E-E5-EA-1D-60
  dst-mac 55-66-77-88-99-00
  frame-type beacon
  ssid-match ssid PrinterLan
  filter-ageout 8
  payload 1 pattern test offset 1
nx9500-6C8809(config-test-signature-test)#

Related Commands

no (wips-signature-config-mode-command)

Removes the configured SSID
Published June 2019prev | next

Email this topicEmail this topic

Print this pagePrint this page