Configure remove-private-as on BGP Peer

  1. Run the following command to create a BGP Peer on a tenant VRF: 
    efa tenant service bgp peer create --name <bgp-peer-name> --tenant <tenant-name> 

                   	--ipv4-uc-nbr <device-ip,vrf-name:neighbor-ip,remote-asn> 
                   	--ipv4-uc-nbr-bfd <device-ip,vrf-name:neighbor-ip,true|false> 

                   	--ipv4-uc-nbr-remove-private-as <device-ip,vrf-name:neighbor-ip,true|false>
  2. Run the following command to update a BGP Peer on a tenant VRF: 
    efa tenant service bgp peer update --name <bgp-peer-name> --tenant <tenant-name>
 
             --operation peer-add
             --ipv4-uc-nbr 10.20.246.25,v1:10.20.30.50,50000 
		--ipv4-uc-nbr-bfd 10.20.246.25,v1:10.20.30.50,true 
		--ipv4-uc-nbr-remove-private-as 10.20.246.25,v1:10.20.30.50,true 
		--ipv4-uc-nbr 10.20.246.26,v1:10.20.30.50,50000 
		--ipv4-uc-nbr-bfd 10.20.246.26,v1:10.20.30.50,true 
		--ipv4-uc-nbr-remove-private-as 10.20.246.26,v1:10.20.30.50,false
    Example:
    efa tenant service bgp peer create --name ten1bgppeer1 --tenant tenant11 
		--ipv4-uc-nbr 10.20.246.25,v1:10.20.30.40,50000 
		--ipv4-uc-nbr-bfd 10.20.246.25,v1:10.20.30.40,true 
		--ipv4-uc-nbr-remove-private-as 10.20.246.25,v1:10.20.30.40,true 
		--ipv4-uc-nbr 10.20.246.26,v1:10.20.30.40,50000 
		--ipv4-uc-nbr-bfd 10.20.246.26,v1:10.20.30.40,true 
		--ipv4-uc-nbr-remove-private-as 10.20.246.26,v1:10.20.30.40,true



    10.20.246.25
ORCA_01# show running-config router bgp
address-family ipv4 unicast vrf v1
  redistribute connected
  neighbor 10.20.30.40 remote-as 50000
  neighbor 10.20.30.40 remove-private-as
  neighbor 10.20.30.40 bfd
  neighbor 10.40.40.253 remote-as 4200000000
  neighbor 10.40.40.253 next-hop-self
  maximum-paths 8
 !
    		 
    10.20.246.26 
ORCA_02# show running-config router bgp
address-family ipv4 unicast vrf v1
  redistribute connected
  neighbor 10.20.30.40 remote-as 50000
  neighbor 10.20.30.40 remove-private-as
  neighbor 10.20.30.40 bfd
  neighbor 10.40.40.252 remote-as 4200000000
  neighbor 10.40.40.252 next-hop-self
  maximum-paths 8
 !
    		 
    efa tenant service bgp peer show --detail

    Name             : ten1bgppeer1
Tenant           : tenant11
State            : bgp-peer-created
Description      : 

Static Peer
-----------
Device IP                   : 10.20.246.25
VRF                         : v1
AFI                         : ipv4
SAFI                        : unicast
Remote IP                   : 10.20.30.40
Remote ASN                  : 50000
Next Hop Self               : false
Update Source IP            : 
BFD Enabled                 : true
BFD Interval                : 0
BFD Rx                      : 0
BFD Multiplier              : 0
MD5 Password                : 
Remove Private AS           : true
Default Originate           : false
Default Originate Route Map : 
Prefix List In              : 
Prefix List Out             : 
Route Map In                : 
Route Map Out               : 
Dev State                   : provisioned
App State                   : cfg-in-sync

    Device IP                   : 10.20.246.25
VRF                         : v1
AFI                         : ipv4
SAFI                        : unicast
Remote IP                   : 10.20.30.50
Remote ASN                  : 50000
Next Hop Self               : false
Update Source IP            : 
BFD Enabled                 : true
BFD Interval                : 0
BFD Rx                      : 0
BFD Multiplier              : 0
MD5 Password                : 
Remove Private AS           : true
Default Originate           : false
Default Originate Route Map : 
Prefix List In              : 
Prefix List Out             : 
Route Map In                : 
Route Map Out               : 
Dev State                   : provisioned
App State                   : cfg-in-sync

Device IP                   : 10.20.246.26
VRF                         : v1
AFI                         : ipv4
SAFI                        : unicast
Remote IP                   : 10.20.30.50
Remote ASN                  : 50000
Next Hop Self               : false
Update Source IP            : 
BFD Enabled                 : true
BFD Interval                : 0
BFD Rx                      : 0



    
BFD Multiplier              : 0
MD5 Password                : 
Remove Private AS           : false
Default Originate           : false
Default Originate Route Map : 
Prefix List In              : 
Prefix List Out             : 
Route Map In                : 
Route Map Out               : 
Dev State                   : provisioned
App State                   : cfg-in-sync

Device IP                   : 10.20.246.26
VRF                         : v1
AFI                         : ipv4
SAFI                        : unicast
Remote IP                   : 10.20.30.40
Remote ASN                  : 50000
Next Hop Self               : false
Update Source IP            : 
BFD Enabled                 : true
BFD Interval                : 0
BFD Rx                      : 0
BFD Multiplier              : 0
MD5 Password                : 
Remove Private AS           : true
Default Originate           : false
Default Originate Route Map : 
Prefix List In              : 
Prefix List Out             : 
Route Map In                : 
Route Map Out               : 
Dev State                   : provisioned
App State                   : cfg-in-sync
  3. Verify the switch configuration on the SLX device. 
    Rack1-Device1# show running-config router bgp
router bgp
 local-as 4200000000
 capability as4-enable
 fast-external-fallover
 neighbor 10.20.20.4 remote-as 4200000000
 neighbor 10.20.20.4 next-hop-self
 address-family ipv4 unicast
  network 172.31.254.46/32
  network 172.31.254.123/32
  maximum-paths 8
  graceful-restart
 !
 address-family ipv4 unicast vrf ten1vrf1
  redistribute connected
  neighbor 10.20.30.40 remote-as 50000
  neighbor 10.20.30.40 remove-private-as
  neighbor 10.20.30.40 bfd
  neighbor 10.20.30.50 remote-as 50000
  neighbor 10.20.30.50 remove-private-as
  neighbor 10.20.30.50 bfd
  maximum-paths 8
 !
 address-family ipv6 unicast
 !
 address-family ipv6 unicast vrf ten1vrf1
  redistribute connected
  maximum-paths 8
 !
 address-family l2vpn evpn
  graceful-restart
 !
!
    		 
    Rack1-Device2# show running-config router bgp
router bgp
 local-as 4200000000
 capability as4-enable
 fast-external-fallover
 neighbor 10.20.20.5 remote-as 4200000000
 neighbor 10.20.20.5 next-hop-self
 address-family ipv4 unicast
  network 172.31.254.46/32
  network 172.31.254.176/32
  maximum-paths 8
  graceful-restart
 !
 address-family ipv4 unicast vrf ten1vrf1
  redistribute connected
  neighbor 10.20.30.40 remote-as 50000
  neighbor 10.20.30.40 remove-private-as
  neighbor 10.20.30.40 bfd
  neighbor 10.20.30.50 remote-as 50000
  neighbor 10.20.30.50 remove-private-as
  neighbor 10.20.30.50 bfd
  maximum-paths 8
 !
 address-family ipv6 unicast
 !
 address-family ipv6 unicast vrf ten1vrf1
  redistribute connected
  maximum-paths 8
 !
 address-family l2vpn evpn
  graceful-restart
 !
!
    Note

    Note

    For information about commands and supported parameters to configure remove-private-as attribute, see Extreme Fabric Automation Command Reference, 2.7.0 .
9037424-02 Rev AA