The table below lists the accessories available for your access point. For additional information, see 802.11ax and Cloud Access Points Accessories.
Note
The Hardware Kit ships with the AP5050D.| Accessory | Description | Comment |
|---|---|---|
| ACC-CAT6-LAN-GSKT | A black gasket. | For use with a CAT6 and CAT6A LAN cables. |
| ACC-WIFI-MICRO-USB | Micro USB cable | Used for troubleshooting issues. |
| KT-147407-02 | A stainless steel mounting kit for mounting access points outdoors. | For use on all outdoor access points though some outdoor access points require an adaptor bracket. |
| KT-150173-01 | A 12-inch extension arm for pole and wall mounting. You must use KT-147407-02 for pole mounting. |
Use this arm when a standoff distance is required. It
provides a minimum standoff distance of twelve inches and helps
avoid interference with the antennas. For use on all outdoor access points though some outdoor access points require an adaptor bracket. |
| MBO-ART03 |
An outdoor access point (OAP) mounting bracket having +/-80 degree tilt on 2-axis and an adjustable 7.5", 9" or 10.5" extension capability. |
Use this bracket for wall mounts and Unistrut brackets; it can also be used for mounting on a pole with the pole section from KT-147407-02. |
| MBO-ART02 Note:
The MBO-ART02 wall mount bracket is End of Sale (EOS) as of January, 2023. It is replaced by the MBO-ART03 bracket. |
A wall mounting bracket with +/- 80-degree that can be adjusted in 20-degree increments. It also has a 2-axis tilt and 10 -inch extension. | Use this bracket for outdoor use. |
| 30520 The 30520 wireless mounting kit is End of Sale (EOS). |
WS-MBO-POLE01. A pole mounting bracket. | Use this bracket with MBO-ART02 for pole mounting the MBO-ART02. |