Install the Access Point on a Wall Using MBO-ART02 Articulating Mounting Bracket

Before you begin

Note

The MBO-ART02 wall mount bracket is End of Sale (EOS) as of January, 2023. It is replaced by the MBO-ART03 bracket.

Obtain the items listed in the following table.

Table 1. Hardware Requirements for MBO-ART02 Articulating Mounting Bracket Wall Installation
Quantity	Item
1	Access point
1	MBO-ART02 articulating mounting bracket
4	M6 hex-head screws Two M6 hex-head screws to attach the MBO-ART02 to the access point. Four M6 hex-head screws to attach the MBO-ART02 bracket to the wall.

About this task

Image of the ART-02 extension arm mounting holes being marked.

The MBO-ART02 bracket is for outdoor use when you require a bracket with +/- 80-degree that can be adjusted in 20-degree increments. It also has a 2-axis tilt and 10 -inch extension.

Procedure

Using of the MBO-ART02 articulating mounting bracket‘s end as a template, mark and drill two holes on the wall.
Align the mounting holes on the MBO-ART02 articulating mounting bracket against the holes on the wall and attach the bracket using four M6 hex-head screws.
Attach the MBO-ART02 to the access point using two M6 hex-head screws.