Install the Access Point on a Wall or Flat Surface Using the KT-147407-02 Bracket Parts

Before you begin

Obtain the following items:
  • Flat part of the KT-147407-02 bracket
  • 1-axis tilt part of the KT-147407-02 bracket
  • One access point
  • Six M6 screws
  • Four M6 headsize screws
Click to expand in new window
Flat Part of the KT-147407-02 Bracket
Image of the flat part of the KT-147407-02 bracket part. The flat part is square in shape and has four large semi-circular cuts on its front face.
Click to expand in new window
1-axis Tilt Bracket
Image of the 1-axis tilt part of the KT-147407-02 bracket. The 1-axis tilt part has four small semi-circular cuts on its front face.

About this task

Use the following information when you install the access point on a wall or flat surface with the KT-147407-02 bracket.

Procedure

  1. Attach the flat part of the KT-147407-02 bracket to the access point using two M6 screws.
  2. Using the 1-axis tilt bracket as a template, mark and drill four holes on a wall or on a flat surface.
  3. Attach the 1-axis tilt bracket to a wall or flat surface using four M6 headsize screws.
  4. Align the 1-axis tilt bracket part inside the flat part of the KT-147407-02 bracket, and attach the flat bracket to the 1-axis tilt bracket using four M6 screws.
  5. Tilt the access point to a desired angle and tighten the four M6 screws to a torque of 45 in-lbs.
    The tilt bracket has +15 degrees to -15 degrees of tilt.
9037683-01 Rev AC