Warning
When installing the access point on a wall or to a pole, the cable glands must face down.| Mounting bracket and part number | Unistrut install | Wall install | Pole install | Notes |
|---|---|---|---|---|
| KT-147407-02 bracket; comes with three bracket parts | No | Yes | Yes | For attaching to a wall or a flat surface, use the bracket part that has two holes. For attaching to a pole, attach the KT-147407-02 pole part on top of the 1-axis tilt part |
| KT-150173-01; extension arm | No |
Yes. For +/-15 degree tilt: attach the KT-150173-01 extension arm to the 1-axis KT-147407-02 tilt part. |
Yes, when paired with the KT-147407-02 bracket. | None |
| MBO-ART03 | Yes | Yes |
Yes, when paired with the KT-147407-02 bracket. |
Adjustable 7.5", 9", and 10.5" extension with 2-axis +/-80 degree
(in 10 degree increments) articulating mounting bracket. For wall installations, the wall must be strong enough to support the access point during inclement weather |
| MBO-ART02 The MBO-ART02 wall mount bracket is End of Sale (EOS) as of January, 2023. It is replaced by the MBO-ART03 bracket. |
No | Yes | Yes, when paired with the 30520 (WS-MBO-POLE01) bracket. | The articulating mounting bracket is paired with the POLE01
bracket for pole installations. For wall installations, the wall must be strong enough to support the access point during inclement weather |
30520 (WS-MBO-POLE01 bracket)The 30520 wireless mounting kit is End of Sale (EOS). |
No | No | Yes (must be used with the MBO-ART02 bracket) | If the pole diameter is <= 1.0 in. (25.4 mm), use small cable
clamp. If the pole diameter is between 5.0 in. - 7.0 in. (178.0 mm),
use large cable clamp. For any other pole diameter, provide your own
stainless steel cable clamp. The band must be 0.5 in. (12.7 mm)
wide The POLE01 bracket can be used only when paired with the MBO-ART02 bracket |