AP5050D Purchase Order Information

Use this information to order your access point and accessories.

AP5050D Order Information

The AP5050D access point is sold by itself, and you must order the mounting brackets and accessories separately for wall, or pole installations.

The ordering details are described in the following table.

Table 1. AP5050D Part Number
Part number Description
AP5050D-WW Outdoor tri-radio WiFi 6E access point (4x4:4), 2.4 GHz, 5GHz, 6GHz, and multirate port, internal directional antennas.

Domain: World SKU

KT-147407-02 Bracket Order Information

You can install the access point to a wall using the KT-147407-02 bracket parts (+/-15 degree, 1-axis) or the MBO-ART02 (20 degree increments +/-80 degrees, 10 inch extension).

You can install the access point to a pole using:
  • KT-147407-02 bracket parts (+/-15 degree, 1-axis), or

  • MBO-ART03 (10 degree increments +/-80 degree on 2-axis, variable 7.5", 9" or 10.5 inch extension) with the KT 147407-02 bracket, or

  • MBO-ART02 (20 degree increments +/-80 degree, 10 inch extension) with the WS-MBO-POLE01 (#30520) bracket.

    You can attach the access point to a wall using the MBO-ART02 bracket. However, if you are using the MBO-ART02 bracket to attach the access point to a pole, you must use the WS-MBO-POLE01 bracket. You cannot attach the access point directly to a pole using the WS-MBO-POLE01 bracket.

    Note

    Note

    The WS-MBO-POLE01 bracket is End of Sale (EOS) as of January, 2023.

    The MBO-ART02 wall mount bracket is End of Sale (EOS) as of January, 2023. It is replaced by the MBO-ART03 bracket.

The ordering details are described in the following table.
Table 2. KT-147407-02 Purchase Information
Part number Box contents
KT-147407-02
Note: The cable clamps must be provided if KT-147407-02 is to be used for pole mounting.
 The KT-147407-02 bracket comes with three bracket parts:
  • Flat part with holes on the metal surface
  • 1-axis tilt part
  • Boxed pole part with step edges
Six hex-head M6 stainless-steel screws
Two hex-head M12 stainless-steel screws
Two hex M12 stainless-steel nuts
One URL card
The KT-147407-02 bracket kit can be used with KT-150173-01 extension arm for adding +/15 degree tilt to wall or pole installations.
Note

Note

You must purchase the KT-150173-01 extension arm separately. But only 1 KT-147407-02 needs to be ordered per KT-150173-01 as one KT-147407-02 provides +/-15 degree tilting, pole mounting capability, or both tilting and pole mounting.

KT-150173-01 Extension Arm Order Information

The contents of the KT-150173-01 extension arm are described in the following table.
Table 3. KT-150173-01 Extension Arm Purchase Information
Part number Box contents
KT-150173-01 One KT-150173-01 12 in. extension arm
Two hex-head M12 stainless-steel screws
Two hex M12 stainless-steel nuts
One URL card
Note

Note

You must provide the required M6 hex-head screws and nuts for flat surface installation.

MBO-ART03 Bracket Order Information

The ordering details are described in the following table.
Table 4. MBO-ART03 Bracket Purchase Information
Part number Box contents
MBO-ART03 MBO-ART03: Adjustable 7 to 10 inch mounting bracket with +/- 80 degree 2-axis (in 10 degree increments) angular adjustment.
Four stainless-steel M8 screws
Two M6 long hex head screws and hex nuts with lock washer.
One URL card
9037683-01 Rev AC