Egress is a combination of ports, port
channels, and precedence.
Before you begin
If applicable, create the port channel that you need for the egress. For more
information, see Create a Port Channel.
About this task
When you create the egress, you
assign a name, select a port and port channel, and then assign precedence. Egress can be
associated with the egress groups that you create.
Procedure
-
In the Navigation menu, select
Configure.
-
In the Devices panel, select the
device for which you want to create egress.
-
Select the Configurations
tab.
-
In the Device Config menu,
select Add
Egress.
-
In the Name field, enter
a name.
The egress cannot have the same
name as an egress group.
-
In the Port/Port Channel
field, select an egress port or port channel.
-
In the Precedence field,
select the order of precedence for the port or port channel.
The precedence indicates the
priority given to the port or port channel. The lower the number, the higher the
priority.
-
Select + to add your
selections.
-
Repeat step 6 through 8 to create all necessary port and precedence
combinations.
-
Save (✔) your
selections.
