The following APs are approved for AFC deployment in Canada and the United States.
Note
The following table uses the term composite device. A composite device is an AP capable of operating in both Standard Power (SP) and Low Power Indoor (LPI).| AP | Integrated GPS Unit | 6GHz LPI | 6GHz SP |
|---|---|---|---|
| Outdoor APs | |||
| AP5060D and AP5060U | Yes | No | Yes |
| AP5050D | Yes | No | Yes |
| AP5050U | Yes | No | Yes |
| AP4060 | Yes | No | Yes |
| AP4060X | Yes | No | Yes |
| Indoor APs
If you deploy the following APs as anchor APs, then you will have to use the ExtremeCloud IQ Mobile Companion app (AFC Mobile app). | |||
| AP3000 | No | Yes | No |
| AP3000X | No | Yes | No |
| AP4020
(composite device) | No | Yes (Default) | Yes |
| AP4020X
(composite device) | No | Yes (Default) | Yes |
| AP4020FX | No | No | Yes |
|
Important: Mandatory for US and Canada - AP4020FX must be deployed with indoor Automatic Frequency Coordination (AFC) only, due to the external antennas on the 6GHz ports. You must deploy with AFC to prevent external antennas from interfering with nearby deployments. AFC verifies your location, antenna type, and power settings, then identifies which channels and power levels are safe to use.
The AP4020FX (SKUs AP4020FX-WW and AP4020FX-WW-TAA) is only available in the USA and Canada because of the 6 GHz external ports. | |||
| AP5010 | No | Yes | Yes |
| AP5020
(composite device) | No | Yes | Yes |
| AP5022, AP5022FX , and AP5022S6D | No | Yes | Yes |