Configures Fabric Attach discovery timeout (in seconds).
| discovery-timeout | Specifies to configure the Fabric Attach discovery-timeout. |
| timeout | Specifies the Fabric Attach discovery time-out in seconds. Range is 45 to 480. |
| none | Specifies that no timeout is configured and the discovered element should be deleted immediately if not present in the LLDP packet. |
None.
The following example configures an Fabric Attach discovery timeout of 120 seconds:
# configure fabric attach discovery-timeout 120
This command was first available in version 33.2.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, and X695 series switches.