configure ospf metric-table
configure ospf metric-table 10M
cost_10m
100M
cost_100m
1G
cost_1g {2.5G
cost_2_5g} {5G
cost_5g} {10G
cost_10g} {25Gcost_25g} {40G
cost_40g}{50G
cost_50g}{100G
cost_100g}
Description
Configures the automatic interface costs for 10 Mbps, 100
Mbps, and 1 Gbps interfaces, and optionally, the 2.5 Gbps, 5 Gbps, 10 Gbps, 25 Gbps,
40 Gbps, 50 Gbps, and 100 Gbps interfaces.
Syntax Description
cost
|
Specifies the interface cost
for the indicated interfaces. |
Default
- 10 Mbps—The default cost is 10.
- 100 Mbps—The default cost is 5.
- 1 Gbps—The default cost is 4.
- 2.5 Gbps—The default cost is 3.
- 5 Gbps—The default cost is 3.
- 10 Gbps—The default cost is 2.
- 25 Gbps—The default cost is 2.
- 40 Gbps—The default cost is 2.
- 50 Gbps—The default cost is 2.
- 100 Gbps—The default cost is 1.
Usage
Guidelines
Not applicable.
Example
The following command
configures the automatic interface costs for 10 Mbps,
100 Mbps, and 1 Gbps interfaces:
configure ospf metric-table 10m 20 100m 10 1g 2
History
This command was
first available in ExtremeXOS 10.1.
The 40 Gbps parameter
was added in ExtremeXOS 12.6.