Displays virtual link(s) information.
| router_identifier | Specifies a router identifier, a four-byte, dotted decimal number. |
| area_identifier | Specifies an OSPFv3 area, a four-byte, dotted decimal number. |
N/A.
Router-identifier—Router ID for the other end of the link.
Area-identifier—Transit area used for connecting the two end-points. The transit area cannot have an area identifier of 0.0.0.0 and cannot be a stub or NSSA area.
The following command displays information about the virtual link to a particular router:
# show ospfv3 virtual-link Neighbor Router ID : 0.0.0.3 Transit Area ID : 0.0.0.1 Hello Interval : 10s Router Dead Interval: 40s Retransmit Interval : 5s Transit Delay : 1s Instance ID : 0 Via Interface : intf2 State : P2P Num of State Changes: 1 Hello Due in : 2 Number of Events : 2 Hellos Rxed : 149 Hellos Txed : 148 DB Description Rxed : 2 DB Description Txed : 2 LSA Request Rxed : 1 LSA Request Txed : 1 LSA Update Rxed : 2 LSA Update Txed : 2 LSA Ack Rxed : 2 LSA Ack Txed : 1 In Discards : 0 Local Address : 2001:20::1 Remote Address : 2001:20::2 Restart Helper : None Restart Helper Strict LSA Checking: Enabled Authentication : IPsec ESP SPI : 500 Algorithm : HMAC-SHA-512 Encrypted Key String: #$bC0GrQHhqjeDABqYwnlfdihIsOhV9g== Virtual Neighbor: RtrId: 0.0.0.3 IpAddr: 2001:20::2 Type: Auto State: FULL DR: 0.0.0.0 BDR: 0.0.0.0 Dead Time: 38 Options: 0x13 (-|R|-|-|E|V6)
The following command displays information about the OSPFv3 virtual link authentication with default (none) configuration (line 19):
# show ospfv3 virtual-link Neighbor Router ID : 0.0.0.3 Transit Area ID : 0.0.0.1 Hello Interval : 10s Router Dead Interval: 40s Retransmit Interval : 5s Transit Delay : 1s Instance ID : 0 Via Interface : intf2 State : P2P Num of State Changes: 1 Hello Due in : 2 Number of Events : 2 Hellos Rxed : 149 Hellos Txed : 148 DB Description Rxed : 2 DB Description Txed : 2 LSA Request Rxed : 1 LSA Request Txed : 1 LSA Update Rxed : 2 LSA Update Txed : 2 LSA Ack Rxed : 2 LSA Ack Txed : 1 In Discards : 0 Local Address : 2001:20::1 Remote Address : 2001:20::2 Restart Helper : None Restart Helper Strict LSA Checking: Enabled Authentication : None Virtual Neighbor: RtrId: 0.0.0.3 IpAddr: 2001:20::2 Type: Auto State: FULL DR: 0.0.0.0 BDR: 0.0.0.0 Dead Time: 38 Options: 0x13 (-|R|-|-|E|V6)
This command was first available in ExtremeXOS 11.2.
IPsec Authentication information was added in ExtremeXOS 31.2.
Authentication Trailer information was added in ExtremeXOS 31.3.