Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

frame-type

Configures the frame type used for matching with this WIPS policy signature

Supported in the following platforms:

  • Access Points — AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
  • Wireless Controller — RFS4010
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

frame-type [all|assoc|auth|beacon|data|deauth|disassoc|mgmt|probe-req|probe-resp|reassoc]

Parameters

frame-type [all|assoc|auth|beacon|data|deauth|disassoc|mgmt|probe-req|probe-resp|
reassoc]

frame-type

 Configures the frame type used for matching

all

 Matches all frame types

assoc

 Matches only association frames

auth

 Matches only authentication frames

beacon

 Matches only beacon frames

data

 Matches only data frames

deauth

 Matches only de-authentication frames

disassoc

 Matches only disassociation frames

mgmt

 Matches only management frames

probe-req

 Matches only probe request frames

probe-resp

 Matches only probe response frames

reassoc

 Matches only re-association frames

Usage Guidelines

The frame type configured determines the SSID match type. To set the SSID match type as SSID, the frame type must be set to beacon, probe-req or probe-resp. For more information see, ssid-match.

Examples

nx9500-6C8809(config-test-signature-test)#frame-type reassoc
nx9500-6C8809(config-test-signature-test)#show context
 signature test
  bssid 11-22-33-44-55-66
  dst-mac 55-66-77-88-99-00
  frame-type reassoc
  filter-ageout 8
nx9500-6C8809(config-test-signature-test)#

Related Commands

no (wips-policy-config-mode-command)

Resets a WIPS signature frame type
Published June 2019prev | next

Email this topicEmail this topic

Print this pagePrint this page