traceroute (user-privi-exec-mode)

Traces the route to a defined destination

Use ‘--help' or ‘-h' to display a complete list of parameters for the traceroute command

Note

This command and its syntax is common to both the User Executable and Privilege Executable configuration modes.

Supported in the following platforms:

• Access Points — AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
• Wireless Controller — RFS4010
• Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

traceroute <LINE>

Parameters

traceroute <LINE>

Example (User Exec Mode)

NOC-NX9500>traceroute 10.234.160.13
traceroute to 10.234.160.13 (10.234.160.13), 30 hops max, 46 byte packets
 1  10.234.160.13 (10.234.160.13)  0.315 ms  0.159 ms  0.137 ms
NOC-NX9500>

Example (Privi Exec Mode)

NOC-NX9500#traceroute 10.234.160.11
traceroute to 10.234.160.11 (10.234.160.11), 30 hops max, 46 byte packets
 1  10.234.160.11 (10.234.160.11)  8.115 ms  0.410 ms  0.370 ms
NOC-NX9500#