Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

channel-list

Device Config Commands

Configures the channel list advertised to wireless clients

Supported in the following platforms:

  • Access Points — AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
  • Wireless Controller — RFS4010
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

channel-list [2.4GHz|5GHz|dynamic]
channel-list [2.4GHz <CHANNEL-LIST>|5GHz <CHANNEL-LIST>|dynamic]

Parameters

channel-list [2.4GHz <CHANNEL-LIST>|5GHz <CHANNEL-LIST>|dynamic]
channel-list Configures the channel list advertised to wireless clients
2.4GHz <CHANNEL-LIST> Configures the channel list advertised by radios operating in 2.4 GHz
  • <CHANNEL-LIST> – Specify a list of channels separated by commas or hyphens.
5GHz <CHANNEL-LIST> Configures the channel list advertised by radios operating in 5.0 GHz
  • <CHANNEL-LIST> – Specify a list of channels separated by commas or hyphens.
dynamic Enables dynamic (neighboring access point based) update of configured channel list

Example

nx9500-6C8809(config-device-00-04-96-4A-A7-08)#channel-list 2.4GHz 1,2

nx9500-6C8809(config-device-00-04-96-4A-A7-08)#show context
ap81xx 00-04-96-4A-A7-08
 use profile default-ap81xx
 use rf-domain default
 hostname ap8163-4AA708
 area RMZEcospace
 channel-list 2.4GHz 1,2
nx9500-6C8809(config-device-00-04-96-4A-A7-08)#

Related Commands

no Resets the channel list configuration
Published August 2019prev | next

Email this topicEmail this topic

Print this pagePrint this page