ap8432

Adds an AP8432 to the network. If a profile for the AP is not available, a new profile is created.

Supported in the following platforms:

  • Access Point — AP8432, AP8533
  • Wireless Controllers — RFS4010
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

ap8432 <MAC>

Parameters

ap8432 <MAC>
<MAC> Specify the AP8432's MAC address.

Examples

nx9500-6C8809(config)#ap8432 84-24-8D-80-C2-AC
nx9500-6C8809(config-device-84-24-8D-80-C2-AC)#show context
ap8432 84-24-8D-80-C2-AC
 use profile default-ap8432
 use rf-domain default
 hostname ap8432-80C2AC
nx9500-6C8809(config-device-84-24-8D-80-C2-AC)#
nx9500-6C8809(config)#show wireless ap configured
---------------------------------------------------------------------------------------
IDX         NAME                MAC              PROFILE       RF-DOMAIN    ADOPTED-BY
---------------------------------------------------------------------------------------
 1    ap8432-80C2AC       84-24-8D-80-C2-AC   default-ap8432   default      un-adopted
---------------------------------------------------------------------------------------
nx9500-6C8809(config)#

Related Commands

no (global-config-mode) Removes an AP8432 from the network