interface-config-radio-instance
Enables a WLAN on this radio
Use this command to configure WLAN/BSS mappings for an existing access point deployment. Administrators can assign each WLAN its own BSSID. If using a single-radio access point, there are 8 BSSIDs available. If using a dual-radio access point there are 8 BSSIDs for the 802.11b/g/n radio and 8 BSSIDs for the 802.11a/n radio.
Print
this page
Email this topic
Feedback
View PDF
Download EPUBwlan <WLAN-NAME> {bss|primary}
wlan <WLAN-NAME> {bss <1-16>} {primary}
wlan <WLAN-NAME> {bss <1-16>} {primary}
| <WLAN-NAME> {bss <1-16> |primary} | Specify the WLAN
name (it must have been already created and configured)
|
nx9500-6C8809(config-profile-71xxTestProfile-if-radio1)#wlan TestWLAN primary nx9500-6C8809(config-profile-71xxTestProfile-if-radio1)#show context interface radio1 rf-mode sensor placement outdoor mesh client rts-threshold 100 wireless-client tx-power 20 wlan TestWLAN bss 1 primary off-channel-scan channel-list 2.4GHz 1 guard-interval long aggregation ampdu tx-only rifs tx-only use association-acl-policy test sniffer-redirect omnipeek 172.16.10.1 channel 1 aeroscout forward ekahau forward ip 172.16.10.1 port 3 non-unicast tx-rate bss 1 dynamic-all non-unicast tx-rate bss 2 highest-basic --More-- nx9500-6C8809(config-profile-71xxTestProfile-if-radio1)#
| no (radio-interface-config-command) | Disables a WLAN on a radio |