Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

server-host

Configures the ExtremeLocation server‘s hostname. When configured, the WiNG controller stages the Tenant‘s site hierarchy information to the specified server.

Supported in the following platforms:

  • Access Points — AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8432, AP8533
  • Wireless Controller — RFS4010
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

server-host 1 ip <HOSTNAME> {port <1-65535>}

Parameters

server-host 1 ip <HOSTNAME> {port <1-65535>}
server-host 1 ip <HOSTNAME> Identifies the ExtremeLocation server by its hostname
  • <HOSTNAME> – Enter ExtremeLocation server‘s hostname.
    Note: Enter the server‘s hostname and not the IP address, as the IP address is likely to change periodically in order to balance load across multiple Location server instances.
{port <1-65535>} optional. Configures the port on which the ExtremeLocation server is reachable
  • <1-63335> – Selects a port from 1 - 65535 for the ExtremeLocation server.
    Note: By default the ExtremeLocation server is reachable on port 443.

Examples

nx9500-6C8809(config-location-policy-ELocPolicy)#server-host 1 ip xyz.com
nx9500-6C8809(config-location-policy-ELocPolicy)#show context
location-policy ELocPolicy
 enable
 server-host 1 ip xyz.com port 443
 location-key dGVzdEAxMjM0NQo
nx9500-6C8809(config-location-policy-ELocPolicy)#

Related Commands

no (location-policy-config-commands) Removes ExtremeLocation server's hostname from the policy
Published August 2019prev | next

Email this topicEmail this topic

Print this pagePrint this page