geo-coordinates

Configures the longitude and latitude of the RF Domain in order to fix its exact geographical location on a map. Use this command to define the geographical area where a common set of device configurations are deployed and managed by this RF Domain policy.

Supported in the following platforms:

• Access Points — AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
• Wireless Controller — RFS4010
• Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

geo-coordinates <-90.0000-90.0000> <-180.0000-180.0000>

Parameters

geo-coordinates <-90.0000-90.0000> <-180.0000-180.0000>

geo-coordinates <-90.0000-90.0000> <-180.0000-180.0000> Configures the geo-coordinates of this RF Domain <-90.0000-90.0000> – Specify the latitude from -90.0000 - 90.0000. -180.0000-180.0000 – Specify the longitude from -180.0000 - 180.0000.

Examples

nx9500-6C8809(config-rf-domain-TechPubs)#geo-coordinates 12.971599 77.594563

nx9500-6C8809(config-rf-domain-TechPubs)#show context
rf-domain TechPubs
 location Bangalore
 geo-coordinates 12.9716 77.5946
 timezone Asia/Calcutta
 country-code in
 use database-policy default
 use nsight-policy AP-rfd
 control-vlan 1
 controller-managed
 use license WEBF
nx9500-6C8809(config-rf-domain-TechPubs)#

Related Commands

no (rf-domain-config-mode) Removes or resets this RF Domain‘s configured geo-coordinates