The access point Inventory tab displays granular data on devices
managed by the selected access point. Information is displayed in easy to read
tables and graphs.
To review the access point's
inventory of connected devices:
Select the
Inventory tab.
The selected access
point's inventory screen displays.
Access Point
Screen - Inventory Tab
Review the following access
point inventory information:
The Radios
Type field displays the total number of radios utilized
by this access point. The graph lists the number of radios in both the
2.4 GHz and 5 GHz radio bands. Refer to the Total Radios
column to review the number of managed radios. Additionally,
use the bar graphs to assess the number WLANs utilized by supported
radio bands.
Periodically select Refresh (at the bottom of the screen) to update the
radio information.
The WLAN
Utilization table displays the top 5 WLANs utilized by
this access point in respect to client support. The first table lists
the total number of WLANs managed by this system. The second table lists
the top five (5) WLANs in terms of the usage percentage along with their
name and network identifying SSID. The utilization index measures how
efficiently the RF medium is utilized. It is defined as a percentage of
the current throughput relative to the maximum throughput possible.
The quality is measured as:
0-20 – Very
low utilization
20-40 – Low
utilization
40-60 –
Moderate utilization
60 and above
– High utilization
Periodically select Refresh (at the bottom of the screen) to update
WLAN utilization information.
The Wireless
Clients table displays information about the wireless
clients managed by the selected access point. Information is presented
in two (2) tables and a graph. The first table lists the total number of
clients managed by the listed access point. The second lists the top
five (5) radios in terms of the number of connected clients. The graph
just below the table lists the number of clients by radio type.
