Displays information on existing BFD sessions.
This command has no arguments or variables.
N/A.
Use this command to show the status of the current BFD sessions.
Init—The state when BFD is establishing the session.
Down—The state when BFD detects that the session is down.
Admin Down—The state when the user disables BFD on that interface.
Up—The state when the BFD session is established.
The following command displays information on current BFD sessions:
show bfd
Following is sample output from this command:
Print
this page
Email this topic
Feedback
View PDF
Download EPUB
Number of sessions : 2
Sessions in Init State : 0
Sessions in Down State : 0
Sessions in Admin Down State : 1
Sessions in Up State : 1
SNMP Traps for Session Down : Enabled
SNMP Traps for Session Up : Enabled
SNMP Traps Batch Delay : 1000 ms
Hardware Assist Operational State : Enabled
(or)
: Disabled
(Incapable heterogeneous stack)
(Incapable standalone platform)
(Loopback port not configured)
Hardware Assist Primary Loopback Port : 1:1
Hardware Assist Secondary Loopback Port : None
Maximum # of Hardware Assist Sessions : 2047
01234567890123456789012345678901234567890123456789012345678901234567890123456789
This command was first available in ExtremeXOS 12.4.
The hardware assist output was added in ExtremeXOS 21.1.
This command is available on all platforms.