Clears, resets the counters gathered by EAPS (Extreme Automatic Protection Switching) for all of the EAPS domains and any EAPS shared ports configured on the switch.
This command has no arguments or variables.
N/A.
Use this command to clear, reset the EAPS counters.
The counters continue to increment until you clear the information. By clearing the counters, you can see fresh statistics for the time period you are monitoring.
show eaps counters —This command displays summary EAPS counter information.
show eaps counters shared-port —If configured for EAPS shared ports, this command displays summary EAPS shared port counter information.
The following command clears, resets all of the counters for EAPS:
clear eaps counters
This command was first available in ExtremeXOS 11.6.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X870, X440-G2, X620 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB