This command enables IPv6 route sharing.
vr_name | Specifies a VR or VRF. If no VR name is specified, the current CLI context is used. |
all | Specifies all VR or VRF. |
Disabled.
This command enables IPv6 route sharing for the IPv6 address family and VR.
The following example enables IPv6 route sharing for the IPv6 address family and the VR of the current CLI context.
enable iproute ipv6 sharing
This command was first available in ExtremeXOS 15.3.
This command is available on the platforms listed for the IPv6 unicast routing feature in the Feature License Requirements document.
The ability to enable and disable ECMP (Equal Cost Multi Paths) for IPv6 is now supported for all platforms.