This command disables FIP Snooping on one VLAN, or on all VLANS on which FIP Snooping is currently enabled.
Disabling FIP Snooping on a VLAN causes the following changes on that VLAN:
All ACLs installed for the VLAN for FIP Snooping operation are removed.
Note
Depending on the activity of connected devices, some dynamic FDB entries may appear.
All Enodes and virtual links learned on the VLAN are removed.
If the fcf-update mode is automatic, all FCFs learned on the VLAN are removed.
FDB learning is turned on for the VLAN.
| fip | FCoE Initialization Protocol. |
| snooping | Snooping FIP frames. |
| vlan_name | Name of the VLAN on which FIP Snooping is to be disabled. |
Disabled.
Use this command to disable FIP Snooping in the VLAN. This command has no effect if executed on a VLAN for which no configuration record has been created. If a vlan_name is not specified, the command disables FIP Snooping on all VLANS on which it is enabled.
disable fip snooping vlan v3
This command was first available in ExtremeXOS 15.1.
This command is available on the Summit X770.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB