Power cycles the specified ports.
| port_list | Specifies one or more ports or slots and ports for which power is to be reset. |
N/A.
This command power cycles the specified ports. Ports are immediately disabled and then re-enabled, allowing remote PDs to be power-cycled.
This command affects only inline power; it does not affect network connectivity for the port(s).
The following command resets power for port 4 on a switch:
reset inline-power ports 4
This command was first available in ExtremeXOS 11.1.
This command is available on the PoE (Power over Ethernet) devices listed in Extreme Networks PoE Devices.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB