Shows all SSHv2 configuration information, including the ciphers/MACs that are enabled, and Diffie-Hellman minimal supported group.
This command has no arguments or variables.
N/A.
The following example shows all SSHv2 configuration information:
Print
this page
Email this topic
Feedback
View PDF
Download EPUB# show ssh2
SSH module configuration details:
SSH Access : Disabled
Key validity : Invalid
TCP port : 22
VR : all
Access profile : not set
Secure Mode : Off
Diffie-Hellman Groups : 1 (1024 bits prime), 14 (2048 bits prime)
Idle time : 60 minutes
Ciphers : Not configured
Macs : hmac-md5-etm@openssh.com, hmac-sha1-etm@openssh.com,
hmac-sha2-256-etm@openssh.com, hmac-sha2-512-etm@openssh.com,
hmac-ripemd160-etm@openssh.com, hmac-sha1-96-etm@openssh.com,
hmac-md5-96-etm@openssh.com, hmac-md5, hmac-sha1,
hmac-sha2-256, hmac-sha2-512, hmac-ripemd160,
hmac-ripemd160@openssh.com, hmac-sha1-96, hmac-md5-96
This command was first available in ExtremeXOS 22.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X870, X440-G2, X620 series switches.