Displays statistics output for the Extreme Service Verification tool on the specified VLAN.
| vlan | \Specifies the VLAN for the traffic test. |
| vlan_name | Specifies a VLAN name. |
N/A.
Use this command to display test output for the Extreme Service Verification tool on the specified VLAN.
The following example displays show output for the Extreme Service Verification tool on vlan1 and vlan3:
VLAN Status Loopback Duration Tx rate Tx Frame Tx Total Rx Total
Port (hh:mm:ss) (Mbps) Size Frames Frames
============================================================================
V1 Running 2 00:09:00 50 64 2000 2000
V1 Stopped 4 00:20:00 150 128 3000 3000
V3 Completed 3 00:60:00 250 256 4000 4000
V1234567> Error 7 00:10:00 100 9100 0 0
============================================================================
> Indicates vlan name string truncated past 8 characters
# show esvt traffic-test detail
VLAN Name : V1
Port : 9
IP Address : 2.2.2.2
Status : Running
Duration (hh:mm:ss) : 00:10:00
Time Remaining(hh:mm:ss) : 00:09:00
Loopback Port : 2
Tx rate (Kpbs) : 200000
Tx Frame Size (bytes) : 64
Tx Frames : 0
Rx Frames : 0
Frames Lost : 0
VLAN Name : V1
Port : 3
IP Address : 6.6.6.6
Status : Stopped
Duration (hh:mm:ss) : 00:20:00
Loopback Port : 4
Tx rate (Kpbs) : 150
Tx Frame Size (bytes) : 128
Tx Frames : 1000
Rx Frames : 1000
Frames Lost : 0
VLAN Name : V3
Port : 5
IP Address : 7.7.7.7
Status : Completed
Duration (hh:mm:ss) : 00:10:00
Loopback Port : 3
Tx rate (Kpbs) : 250
Tx Frame Size (bytes) : 256
Tx Frames : 4000
Rx Frames : 4000
Frames Lost : 0
VLAN Name : V12345678901234567890123456789
Port : invalid port
IP Address : 8.8.8.8
Status : Error
Duration (hh:mm:ss) : 00:02:00
Loopback Port : 7
Tx rate (Kpbs) : 100
Tx Frame Size (bytes) : 9100
Error : Failed to communicate with peer switch
This command was first available in ExtremeXOS 15.3.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X870, X440-G2, X620 series switches.
Print
this page
Email this topic
Feedback