Enables MPLS (Multiprotocol Label Switching) on the switch.
This command has no arguments or variables.
Disabled.
Enabling MPLS allows MPLS processing to begin for any enabled MPLS protocols (RSVP-TE and/or LDP).
While MPLS is transitioning to the enabled state, only the MPLS show commands are accepted.
Note
When MPLS is enabled on a stack, you can only add a MPLS-compatible Summit family switches to the stack.The following command globally enables MPLS on the switch:
enable mpls
This command was first available in ExtremeXOS 11.6.
This command is available only on the platforms that support MPLS as described in the Feature License Requirements document.