enable snmp traps lldp-med

enable snmp traps lldp-med {ports [all | port_list]}

Description

Enables the transmission of Link Layer Discovery Protocol SNMP trap notifications related to LLDP MED extension TLVs.

all	Specifies all ports on the switch.
`port_list`	Specifies one or more ports or slots and ports.

Disabled.

If you do not specify any ports, the system sends LLDP-MED traps for all ports.

The following command enables LLDP-MED SNMP traps for all ports:

enable snmp traps lldp-med ports all

This command was first available in ExtremeXOS 11.5.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X870, X440-G2, X620 series switches.

Published March 2017prev | next