The following table lists the custom RPCs, their locations, and a brief synopsis.
| RPC name | Host module | Synopsis |
|---|---|---|
| activate-status | extreme-firmware | Returns firmware activation status. |
| bna-config-cmd | extreme-ras | Copies configuration data to and from the system. |
| bna-config-cmd-status | extreme-ras | Returns the status of the last configuration command. |
| clear-tm-voq-stat-ing-all-egr-all | brocade-tm-stats | Clears all voq statistics. |
| clear-tm-voq-stat-ing-all-egr-ifname | brocade-tm-stats | Clears per port voq statistics on all devices. |
| clear-tm-voq-stat-slot-id-egr-all | brocade-tm-stats | Clears all voq statistics for selected slot. |
| clear-tm-voq-slot-id-egress-port-name | brocade-tm-stats | Clears per port voq statistics for selected slots. |
| firmware-download | extreme-firmware | Returns the firmware information. |
| firmware-download-sanity | brocade-firmware | Validates the firmware download inputs. |
| firmware-commit | brocade-firmware | Commits firmware information. |
| firmware-restore | brocade-firmware | Restores firmware. |
| fwdl-status | extreme-firmware | Returns the status of the firmware download operation. |
| get-arp | extreme-arp | Returns ARP entries of the managed entity. |
| get-contained-in-ID | extreme-entity | Returns the slot or container name or ID, where the managed device is "contained in". |
| get-interface-detail | extreme-interface-ext | Returns operational details of all the possible interfaces of the managed entity. Use this RPC to discover basic characteristics of all the interfaces in the system. Each sublayer below the internetwork layer of a network interface is considered to be an interface. |
| get-interface-switchport | extreme-interface-ext | Returns switch-port or Layer 2 characteristics of all the interfaces in the managed device. |
| get-ip-interface | extreme-interface-ext | Returns brief details of all interfaces, loopback and VE interface details of particular managed entity. PHY interface details of particular managed entity cannot be given. |
| get-last-config-update-time | extreme-vcs | Returns the time stamp of the last configuration change done on the managed device. |
| get-last-config-update-time-for-xpaths | extreme-vcs | Returns the time stamp of the last configuration change done on the managed device for Xpaths. |
| get-lldp-neighbor-detail | extreme-lldp-ext | Returns the details of all the neighboring interfaces of the managed entity. |
| get-mac-acl-for-intf | extreme-mac-access-list | Returns information about the MAC ACL applied on the specified interfaces. |
| get-mac-address-table | extreme-mac-address-table | Returns the MAC address table for a given MAC address. |
| get-maint-mode-status | brocade-system-maintenance | Returns the maintenance mode status. |
| get-media-detail | extreme-interface-ext | Returns the media properties of all the interfaces of the managed entity. |
| get-netconf-client-capabilities | extreme-netconf-ext | Returns the vendor information for all NETCONF clients. |
| get-port-channel-detail | extreme-lag | Returns link aggregation control configuration parameters for all the port-channels in the system. |
| get-portchannel-info-by-intf | extreme-lag | Returns link aggregation control configuration parameters for a given aggregation port in the system. |
| get-stp-brief-info | extreme-xstp-ext | Returns Spanning Tree Protocol (STP) information. |
| get-stp-mst-detail | extreme-xstp-ext | Returns Multiple Spanning Tree Protocol (MSTP) details. |
| get-system-uptime | extreme-system | Returns the time since the managed entity was last reinitialized. |
| get-vlan-brief | extreme-interface-ext | Returns operational data for a given VLAN and enumeration of all the interfaces belonging to this VLAN. |
| get-tunnel-info | extreme-tunnels-extrpcs | Retrieves summary of one or more tunnles from the switch. |
| get-tunnel-statistics | extreme-tunnels-extrpcs | Retrieves tunnel statistics such as count of bytes and frames transmitted and received. |
| reload | extreme-ha | Reloads HA. |
| set-http-application-url | extreme-http-redirect | Sets the HTTP application URL. |
| show-clock | extreme-clock | Returns the date, time, and time zone. |
| show-firmware-version | extreme-firmware-ext | Returns firmware version information. |
| show-ntp | extreme-ntp | Returns the active NTP server for the extreme VCS fabric or specified switch. |
| show-raslog | extreme-ras-ext | Returns RASlog entries. |
| show-support-save-status | extreme-ras-ext | Returns information about the status of a recent supportSave request. |
| show-system-info | extreme-ras-ext | Returns the routing bridge ID and MAC address of the switch. |
| show-system-monitor | extreme-system-monitor-ext | Returns system status information. |
| user-session-info | extreme-aaa-ext | Returns user role information. |