Installation Site Requirements

Depending upon the cabling used, you need to provide 7.5 to 10 cm (3 to 4 in.) of clearance on the switch I/O port side of the SSA.

See Environmental Guidelines for ExtremeSwitching Products for environmental guidelines relating to the SSA installation.

The installation site must be within reach of the network cabling and must meet the requirements listed below:

• Appropriate grounded power receptacles must be located within 2 meters (7 feet) of the site.
• A temperature of between 5°C (41°F) and 40°C (104°F) must be maintained at the installation site with fluctuations of less than 10°C (18°F) per hour.

Caution

To ensure proper ventilation and prevent overheating, leave a minimum clearance space of 5.1 cm (2.0 in.) at the front and rear of the device.

Precaución: Para asegurar una buena ventilación y evitar que el sistema se sobrecaliente, deje un espacio mìnimo de 5.1 cm (2 pulgadas) con respecto el anverso y reverso del aparato.