Preparing to Install a Pluggable Transceiver

1. Put on the antistatic wrist strap, shipped with the switch, and attach it to the ground receptacle on the switch I/O port side of the SSA.
   Refer to the instructions in the anti-static wrist strap package. See SSA Switch Ground Receptacle for the location of the ground receptacle.

   

   SSA Switch Ground Receptacle

   

   1 = Ground receptacle

2. Remove the pluggable transceiver from the anti-static packaging.
   If there is a protective dust cover on the pluggable transceiver, do not remove it at this time.