Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

Installing the SSA on a Desktop

For desktop installation, you must attach the adhesive rubber feet to the bottom of the SSA.

To attach the rubber feet to the bottom of the SSA, follow these steps:

  1. Place the SSA upside down on a sturdy, flat surface.
  2. Remove the adhesive backing from the four rubber feet.
  3. Adhere the rubber feet to the round, recessed areas on the bottom of the SSA.
  4. Turn the SSA rightside up.
You can now unpack and install the SSA power supplies. See Unpacking the Power Supplies.
Published December 12, 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page