Install a access point to a junction box if you want to power the AP using an
electrical connection.
The ACC-BKT-AX-JB accessory bracket is used when you need to install the access point
on an indoor junction box. The ACC-BKT-AX-JB access has two parts:
A metal part that attaches to the junction box (also called the sheet-metal
junction box hole plate)
ACC-BKT-AX-JB
accessory bracket metal part
A plastic part that attaches to the metal part and the access point (also
called the plastic twist plate)
ACC-BKT-AX-JB
accessory bracket plastic part
Procedure
Align the red dot on the back of the access point against the red dot on the
plastic part.
Push the access point onto the plastic part and turn it clockwise until you
hear it lock in place.
Insert the RJ45 cable connector to the Ethernet connector on the access
point.
