| Status | Activity |
|---|---|
| Dark | Power is off |
| Solid white | The device power is on and the access point is ready to use. The device has successfully established a Control And Provisioning of Wireless Access Points (CAPWAP) connection to ExtremeCloud IQ and is operating normally |
| Slow-blinking white | The device has a CAPWAP connection to ExtremeCloud IQ, but is operating on 802.3at power instead of 802.3bt power |
| Solid amber | The device power is on and the access point is in boot up mode, or is running without a CAPWAP connection |
| Slow-blinking amber | The device has no CAPWAP connection to ExtremeCloud IQ, and is operating on 802.3at power instead of 802.3bt power |
| Fast-blinking amber | The device is updating its IQ Engine firmware |
| Status | Activity |
|---|---|
| Dark | Power is off or Access point is taken over by the controller. Configuration pushes down to access point from controller to turn off the LED completely |
| Solid white | The device is booting or already taken over by the controller |
| Slow-blinking white | The device is in the process of being taken over by the controller or has failed to be taken over by the controller |
| Flashing fading white | Configuration pushes down to access point from controller helping an user to locate the access point location using visual inspection |
| Solid amber | The access point is upgrading its firmware |
| Fast-blinking amber | The access point is acquiring DHCP IP |