If you enable the use of ELRP by ESRP in
the master state, ESRP requests that ELRP packets are periodically sent to ensure that there
is no loop in the network while ESRP is in the master state. By default, the use of ELRP by
ESRP in the master state is disabled.
- To enable the use of ELRP by ESRP in
the master state on a per-ESRP domain basis, and to configure how
often the master checks for loops in the network, use the following
command:
configure esrp esrpDomain elrp-master-poll enable {interval
interval}
- To disable the use of ELRP by ESRP in the master state,
use the following command:
configure esrp esrpDomain elrp-master-poll disable
