ipv6 isis accept (for a VRF)

Configure an IPv6 Intermediate-System-to-Intermediate-System (IS-IS) accept policy instance to apply to all IPv6 routes from all Backbone Edge Bridges (BEBs) for a Virtual Routing and Forwarding (VRF) instance.

Syntax

ipv6 isis accept i-sid <0-16777215>
ipv6 isis accept i-sid <0-16777215> enable
ipv6 isis accept i-sid <0-16777215> route-map WORD<1-64>
ipv6 isis accept isid-list WORD<1-32>
ipv6 isis accept isid-list WORD<1-32> enable
ipv6 isis accept isid-list WORD<1-32> route-map WORD<1-64>
ipv6 isis accept route-map WORD<1-64>
no ipv6 isis accept i-sid <0-16777215>
no ipv6 isis accept i-sid <0-16777215> enable
no ipv6 isis accept i-sid <0-16777215> route-map
no ipv6 isis accept isid-list WORD<1-32>
no ipv6 isis accept isid-list WORD<1-32> enable
no ipv6 isis accept isid-list WORD<1-32> route-map
no ipv6 isis accept route-map

Command Parameters

enable: Enables the IPv6 IS-IS accept policy.
i-sid <0-16777215>: Specifies a service instance identifier (I-SID) number representing a local or remote IPv6 Layer 3 VSN. The number 0 represents the GRT.
isid-list WORD <1-32>: Specifies a list of I-SID numbers representing local or remote IPv6 Layer 3 VSNs.
route-map WORD<1-64>: Specifies an IPv6 IS-IS route policy.

Default

The default is disabled.

Command Mode

VRF Router Configuration