ipv6 neighbor

Comands to configure IPv6 neighbors globally.

Syntax

ipv6 neighbor WORD<0-128> port {slot/port[/sub-port]} mac 0x00:0x00:0x00:0x00:0x00:0x00 vlan <1-4059>
no ipv6 neighbor WORD<0-128> port {slot/port[/sub-port]}
no ipv6 neighbor WORD<0-128> vlan <1-4059>

mac 0x00:0x00:0x00:0x00:0x00:0x00: Specifies the MAC address.
port {slot/port[/sub-port]}: Identifies a single slot and port. If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.
vlan <1-4059>: Specifies the VLAN ID in the range of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system reserves VLAN IDs 4060 to 4094 for internal use. On switches that support the vrf-scaling and spbm-config-mode boot configuration flags, if you enable these flags, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the default VLAN and you cannot create or delete VLAN ID 1.
WORD<0-128>: Ipv6 address in hex colon format.

None

Global Configuration