show ip bfd

Display global Bidirectional Forwarding Detection (BFD) configuration information for IPv4 interfaces.

Syntax

show ip bfd
show ip bfd vrf
show ip bfd vrfids

Command Parameters

vrf: Specifies a VRF instance by VRF name.
vrfids: Specifies a VRF or range of VRFs by ID.

Command Mode

User EXEC

Command Output

The show ip bfd command displays the following information:


Output field	Description
BFD Version	Specifies the current BFD version.
Admin Status	Specifies whether BFD is enabled globally.
Trap Enable	Specifies whether traps are enabled.
Total session number	Specifies the total number of BFD sessions.
UP	Specifies whether a BFD session is in UP state.
DOWN	Specifies whether a BFD session is in DOWN state.
AdminDown	Specifies whether a BFD session is in AdminDown state.
Init	Specifies whether a BFD session is in Init state.

Example

The following example displays global configuration information for BFD on an IPv4 interface.

Switch:1>show ip bfd
================================================================================
                         BFD information - GlobalRouter
================================================================================
                      BFD Version :  1
                     Admin Status :  TRUE
                      Trap Enable :  FALSE
--------------------------------------------------------------------------------
   Total session number :  1

    UP: 1, DOWN: 0, AdminDown: 0, Init: 0
--------------------------------------------------------------------------------