show ipv6 pim active-rp

Displays information about the active rendezvous point (RP) for all groups or a specific group.

Syntax

show ipv6 pim active-rp
show ipv6 pim active-rp group

Command Parameters

group: Specifies the IPv6 group address.

Default

None

Command Mode

User EXEC

Command Output

The show ipv6 pim active-rp command displays the following information:


Output field	Description
GRPADDR	Shows the IPv6 address of the multicast group.
RP-ADDR	Shows the IPv6 address of the RP router. This address can be one of the local PIM-SM enabled interfaces or a gobal IPv6 address of the chosen RP based on hash function.
RP-PRIORITY	Shows the priority of the RP.

Example

The following example displays information about the active rendezvous point (RP) for all groups. If you do not specify an IPv6 address, you receive information about the active RP for all running multicast groups on the switch.

Switch:1>show ipv6 pim active-rp
=================================================================
                   Pim Grp->RP Active RP Table - GlobalRouter
=================================================================
GRPADDR/                                      
RP-ADDR                                         RP-PRIORITY 
-----------------------------------------------------------------
ff30:0:0:0:0:0:0:1                            
5040:0:0:0:0:1:84:1