Show the RESTCONF configuration and operation status.
show application restconf
None
User EXEC
The show application restconf command displays the following information:
|
Output field |
Description |
|---|---|
|
Admin State |
Specifies the administrative state of the RESTCONF application. |
|
TCP Port |
Specifies the TCP port for the RESTCONF server. |
|
Certificate File Status |
Specifies the status of TLS/SSL certificate file whether it is installed or uninstalled. |
|
TLS Enable |
Specifies whether TLS/SSL is enabled or disabled for the RESTCONF server. |
|
Trap Notification |
Specifies whether trap notification is enabled or disabled when the RESTCONF server is not available. |
|
Oper State |
Specifies the operational status of the RESTCONF server. |
|
Web Server Version |
Specifies the RESTCONF web server version that is running on the device. |
|
RESTCONF Server Version |
Specifies the RESTCONF server version that is running on the device. |
The following example displays the RESTCONF configuration.
Switch:1>show application restconf
=====================================================================================
RESTCONF Info
=====================================================================================
Admin State : true
TCP Port : 8080
Certificate File Status : install
TLS Enable : false
Trap Notification : true
Oper State : up
Web Server Version : 1.0.1.11
RESTCONF Server Version : 1.0.1.39
=====================================================================================